| Technical specification - SPYDER IIIa serie cat 2.8-litre | |
| Body type | 2-door spyder |
| Production years | From 1991 to 1994 |
| Engine | Front engined V 6 cylinder @ 90° |
| Bore and stroke | 94 mm / 67 mm |
| Engine capacity | 2790 c.c. |
| Compression ratio | 7,4:1 |
| Maximum power | 222-bhp @ 55000 rpm |
| Distribution | Twim overhead camshafts, three valves per cylinder |
| Induction system | Supercharged with two water-cooled IHI turbochargers/ two intercoolers and Weber Multi Point electonic injection |
| Ignition | Single electronic |
| Lubrification | Forced with delivery pump |
| Transmission | Rear wheel drive |
| Differential | Ranger® final drive: 3,31:1 |
| Clutch | Single dry plate |
| Gearbox | Getrag 5 speed and reverse |
| Chassis | Monocoque construction |
| Front suspension:- | Independent, Mac Pherson strut type, anti-roll bar coil-springs and double action telescopic shock absorbers |
| Rear suspension:- | Independent, double wishbones with coil-springs and double action telescopic shock absorbers |
| Brakes | Servo assisted discs on all four wheels |
| Wheelbase | 2400 mm |
| Wheel tracks | Front 1458 mm Rear 1458 mm |
| Wheels | Magnesium light alloy, size 7"J x 15" |
| Tyres | Front:- 205/50 ZR 15 Rear:- 225/50 ZR 15 |
| Dry weight | 1345 kg |
| Maximum speed | 230 km/h |
| Models constructed | 220 |
 |